Really give this iron some consideration
Jul 28, 2016
First of all, I am not Amish. I am just someone who is tired of spending money on modern irons that disappoint. I have finally found my "forever" iron, and wanted to share my thoughts about it. I have spent a fair amount of money on irons over the years, ranging from moderately-priced to expensive. I have always followed the manufacturers' instructions for keeping them rust-free: empty the water after every use, regularly clean the water chamber with vinegar, keep the steam vents clean, etc. All the irons would eventually spew rusty water on my freshly-washed clothes. Then, I tried a dry iron. That solved the spewing problem, but the iron didn't get sufficiently hot. There aren't many dry irons on the market, and the one I bought quit working altogether after 6 months. I then started reading everything I could find about non-electric, butane/gasoline irons. I found a beat-up gasoline iron in an antique shop, which enabled me to get up close and personal with one. Several months later, I decided to go ahead and buy a new one. I love it, and here's why: 1. No holes in the soleplate means no rusty water can ever spew on your clothes. 2. The soleplate size is just right. It's large enough to cover an expanse of fabric, yet small enough to maneuver around buttonholes and into other tight spaces. 3. It might take you a bit of practice, but lighting the iron is quick and easy. 4. Fuel (Ronson butane) is available online, but I found it locally at Ace Hardware. 5. Once the soleplate is hot, you can adjust the flame down. The soleplate will stay hot with a low flame, which means your fuel will last longer. 6. There's no cord for pets to chew on. 7. If the electricity is out and the outfit you want to wear is wrinkled, you can still get it ironed. 8. I was a little concerned that the iron might feel too heavy (4 pounds), as I am a petite 97 pounds. The iron is so well balanced that it doesn't feel heavy at all. 9. This is a well-designed, well-constructed iron. It's made of metal and very few (if any) plastic parts. This is an appliance that was designed to last, rather than for obsolescence. 10. I studied the diagram of the iron's parts. There are so few that there's just not that much that can go wrong. I don't expect to ever need parts, but it's nice to know that they are available, and will probably be available for decades to come. 11. The flame is visible, yet housed in a deep chamber far enough away from you that it's not scary, nor a fire hazard. 12. The handle is comfortable and sufficiently far enough away from the flame that it doesn't get hot. 13. When you are done ironing, you simply turn a nob to extinguish the flame. The iron cools down in about the same amount of time as it takes for an electric one. Having said all this, I would not recommend this iron for people who have distractions to contend with, or who are forgetful by nature. There is no automatic shut-off feature, and if the iron gets knocked over, it could start a fire.
Nov 20, 2009
A fantastic iron, better made than just about anything else available, and should last a lifetime. It's nearly as easy to use as an electric iron and practical for anyone with or without electricity. No cord to get in the way, and no plastic parts to break.